[Next] [Previous] [Top]
ECE241F Lab 3
The Altera UP-1 board has two seven segment displays attached directly to the pins of the chip. The figure below shows the naming of each segment. The subsequent table gives the connections between segments and the MAX 7128 pins. NOTE: to turn a segment on, you must drive the associated pin with a "0." (not a 1).
Display Segment | 7128 Pin for Digit 1 | 7128 Pin for Digit 2 |
---|---|---|
a | 58 | 69 |
b | 60 | 70 |
c | 61 | 73 |
d | 63 | 74 |
e | 64 | 76 |
f | 65 | 75 |
g | 67 | 77 |
Decimal point | 68 | 79 |